Prime-Line M 6086 Bath Tub Splash Guard, 9 in. x 10-3/4 in., Plastic, White
9 sold in last 24 hours
- White plastic Bath and Tub plastic Splash Guards (7/16 in. thick x 9 in. wide and 10-3/4 in. tall)
- Will need to use silicone sealant to install properly (not included)
- Curved design will divert water back into Tub and Shower enclosure
- These are non-adjustable
- Will fit most Bath and Tub enclosures
- Clean mounting area thoroughly before installation
- Allow proper time amount of time for silicone sealant to cure before using Tub and Shower enclosure Includes one right and one left directional Splash Guard
Tags |
These white bath tub splash guards are constructed of rigid plastic and include a left and right corner piece. Each piece features a water-deflecting wing which curves in 2-3/8 inches towards the tub, designed to redirect flow of excess water back into the tub. These rigid, non-adjustable, corner-fitting splash guards come with a 90 degree angle, designed for tight-fitting corner installations. These splash guards are best installed with a clear or white silicone-based adhesive product, but wall and tub surfaces should be cleaned prior with alcohol to provide for a clean and permanent bond. Silicone adhesive is not provided with this item and must be purchased separately. Application of silicone adhesives should be followed as per manufacturer’s instructions. *Installation Tip: Once surfaces has been cleaned and splash guards have been set in place with silicone, allow 24 hours for curing prior to exposing to moisture.
These splash guards are constructed from white plastic. They feature a curved edge design and include 1 left and 1 right hand guard. A adhesive tub caulk or mastic is recommended for installation.
| Expiry Date | Dec 2027 |
| Brand | Prime-Line |